How to Clean and Maintain Your Breville Juice Fountain Elite Juicer

Cleaning the Cutting Disc

Cleaning the cutting disc of your Breville Juice Fountain Elite Juicer is crucial to maintaining its performance and extending its lifespan. Follow these simple steps to ensure that your cutting disc stays clean and free from any residue or debris:

1. Start by removing the cutting disc from the juicer. This can be done by unscrewing or detaching the disc from its housing, depending on the specific model of your juicer.
2. Rinse the cutting disc under running water to remove any pulp or residue that may have accumulated during juicing. It is important to do this immediately after juicing to prevent any residue from drying and becoming difficult to remove.
3. Once you have rinsed the disc, use a soft brush (such as a toothbrush or a bottle brush) to clean any remaining debris that may be stuck on the disc. Be gentle while brushing to avoid damaging the delicate blades.
4. Make sure to thoroughly clean all parts of the cutting disc, including the blades, the center spindle, and the disc's edges. Pay close attention to any hard-to-reach areas, ensuring that no leftover pulp or residue remains.

After cleaning the cutting disc, you can reassemble it back into your Breville Juice Fountain Elite Juicer, ready for your next juicing session. Regular cleaning and maintenance of the cutting disc will not only ensure optimal performance but also promote hygienic juicing, free from any potential build-up of bacteria or mold.

• For a deeper clean, you can soak the cutting disc in warm, soapy water for a few minutes before rinsing and brushing. This can help remove any stubborn residue that may have adhered to the disc.
• Do not use abrasive cleaners or scrubbers on the cutting disc, as they can scratch or damage the stainless steel surface.
• Inspect the cutting disc regularly for any signs of wear or damage. If you notice any bent or dull blades, it might be time to replace the cutting disc to ensure optimal performance.

Cleaning the Filter Basket

Properly cleaning and maintaining your Breville Juice Fountain Elite Juicer is essential to ensure its optimal performance and longevity. One important component that requires regular cleaning is the filter basket. The filter basket is responsible for separating the juice from the pulp, and it can become clogged with residue and pulp if not cleaned properly. Follow these steps to clean the filter basket effectively:

• Step 1: Remove the filter basket from the juicer. This can be done by unlocking and removing the juicing cover, then using the included pusher to lift the filter basket out of the motor base.
• Step 2: Rinse the basket under running water to remove any pulp or residue. This initial rinse helps to loosen any stuck-on particles and prepares the basket for a deeper clean.
• Step 3: Use a soft brush, such as a toothbrush or a dish brush, to clean any remaining debris from the basket. Pay special attention to the mesh screen, as this is where most of the residue accumulates. Gently scrub the screen to remove any pulp or fiber that may be stuck. Be thorough but gentle to avoid damaging the mesh.
• Step 4: Ensure that all parts of the basket are thoroughly cleaned before reassembling. Check for any remaining pulp or residue and rinse again if necessary. Once clean, dry the basket completely before placing it back into the juicer.

Cleaning the filter basket regularly helps to maintain the juicer's efficiency and prevent clogging, which can affect the quality of your juices. By following these simple steps, you can ensure that your Breville Juice Fountain Elite Juicer works optimally for years to come.

• Regularly cleaning the filter basket prevents clogging and maintains the juicer's efficiency.
• A soft brush helps to remove debris from the mesh screen effectively.

Cleaning the Juicing Bowl

When it comes to cleaning and maintaining your Breville Juice Fountain Elite Juicer, one important component to focus on is the juicing bowl. The juicing bowl is where all the magic happens, extracting the juice from your fruits and vegetables. Keeping this part of your juicer clean is essential for optimal performance and longevity of your machine. Here's a step-by-step guide on how to clean the juicing bowl:

• 1. Remove the juicing bowl from the juicer. This can usually be done by twisting it counterclockwise and lifting it off the motor base. Some models may have a release button or lever that needs to be pressed to remove the bowl.
• 2. Rinse the bowl under running water to remove any pulp or residue. This will help to loosen any stubborn particles and make the next step easier.
• 3. Use a soft brush to clean any remaining debris from the bowl. A brush with soft bristles, like a dish brush or toothbrush, is ideal for reaching into the nooks and crannies of the juicing bowl. Scrub gently to avoid damaging the bowl.
• 4. Ensure that all parts of the bowl are thoroughly cleaned before reassembling. Pay special attention to the mesh filter, as this is where pulp tends to accumulate. Use your brush to remove any pulp stuck in the tiny holes.

Cleaning the juicing bowl of your Breville Juice Fountain Elite Juicer is a simple process that should be done after each use to prevent the buildup of pulp and residue. By following these steps, you can ensure that your juicer operates at its best and provides you with delicious, fresh juice every time you use it.

• Regularly clean the juicing bowl to maintain optimal performance.
• Always rinse the bowl under running water before cleaning.
• Use a soft brush to reach into the crevices of the bowl.
• Pay extra attention to the mesh filter and remove any pulp stuck in it.

Cleaning the Pulp Container

To ensure the longevity and optimal performance of your Breville Juice Fountain Elite Juicer, it is important to regularly clean and maintain its various components. One of the essential parts that require cleaning is the pulp container. Here's a step-by-step guide on how to clean and maintain the pulp container of your Breville Juice Fountain Elite Juicer:

1. Step 1: Remove the pulp container from the juicer

   To begin the cleaning process, carefully detach the pulp container from the juicer. Ensure that the juicer is turned off and unplugged before proceeding.

2. Step 2: Empty any pulp into a separate container for disposal

   Once the pulp container is removed, empty its contents into a separate container for disposal. This will prevent any blockages or clogs during the cleaning process.

3. Step 3: Wash the pulp container with warm soapy water

   Using warm soapy water, thoroughly clean the pulp container. Gently scrub the interior and exterior surfaces of the container to remove any residual pulp or debris. Pay attention to hard-to-reach areas, such as corners and edges.

4. Step 4: Rinse the container thoroughly to remove any soap residue

   After washing, rinse the pulp container under running water to remove any soap residue. Ensure that all soap is completely washed away to avoid altering the taste of future juices.

5. Step 5: Allow the container to dry completely before reattaching

   Finally, let the pulp container air dry completely before reattaching it to the juicer. Placing a wet container back into the juicer can cause moisture buildup and potential mold growth.

• Regularly clean the pulp container to prevent buildup and maintain optimal juicing performance.
• Never immerse the base of the juicer, including the motor, in water or any other liquid.
• Using a soft brush or cloth can help remove any stubborn pulp residue.
• Ensure that all parts are completely dry before reassembling the juicer.

Cleaning the Juice Jug

Properly cleaning and maintaining your Breville Juice Fountain Elite Juicer is essential to ensure its longevity and optimal performance. One important component that requires regular cleaning is the juice jug. By following these simple steps, you can keep your juice jug pristine and ready for use:

1. Begin by emptying any remaining juice from the jug. Carefully pour out the contents into a separate container or directly into the sink. It's essential to remove all the juice to prevent any build-up or residue.
2. After emptying the jug, wash it with warm soapy water. You can use a mild dish soap to effectively remove any juice residue or stains on the surface. Gently scrub the jug with a non-abrasive sponge or cloth to avoid damaging the material.
3. Rinse the jug thoroughly under running water to remove any soap residue. Make sure to rinse all parts of the jug, including the spout and handle, to ensure a complete clean. This step is crucial as leftover soap can affect the taste and quality of your future juices.
4. Allow the jug to air dry completely before using or storing it. Placing the jug upside down on a drying rack or towel can speed up the drying process. Avoid using a cloth to dry the jug, as it may leave behind lint or particles.

By regularly following these cleaning steps, you can maintain the cleanliness and functionality of your Breville Juice Fountain Elite Juicer's juice jug. Additionally, here are a few additional tips to keep in mind:

• Always clean the jug immediately after each use. This prevents any residue from drying and becoming more difficult to remove.
• Avoid using abrasive cleaners, scouring pads, or harsh chemicals on the jug, as they can damage the surface and affect the taste of your juices.
• For stubborn stains, you can soak the jug in a mixture of warm water and baking soda for a gentle yet effective cleaning solution. Rinse thoroughly afterward.
• Ensure that the jug is completely dry before reassembling and using it. Moisture can lead to mold or bacteria growth.

Cleaning the Food Pusher

Properly cleaning and maintaining your Breville Juice Fountain Elite Juicer is essential to ensure its longevity and efficient performance. One important component that requires regular cleaning is the food pusher. The food pusher is designed to safely and effectively guide the fruits and vegetables through the juicer, but over time, it can accumulate pulp and residue. Here are the steps on how to clean and maintain the food pusher:

1. First, remove the food pusher from the juicer. This can be done by gently pulling it out of the juicer's feeding chute. Take care not to apply excessive force to avoid any damage.

2. Next, wash the food pusher with warm soapy water. Use a mild dish soap or a kitchen cleaner to gently scrub away any pulp or residue that may have accumulated on the surface. Pay attention to the grooves and crevices to ensure thorough cleaning.

3. Rinse the food pusher thoroughly under running water to remove any soap residue. Make sure to remove all traces of soap to avoid altering the taste of your future juices.

4. After rinsing, allow the food pusher to air dry completely before using or storing it. Placing it in a dish drying rack or leaving it on a clean towel will facilitate the drying process.

Regularly cleaning the food pusher of your Breville Juice Fountain Elite Juicer will not only maintain its functionality but also promote hygienic juicing. By following these simple steps, you can ensure that your juicer remains in optimal condition for years to come.

• Make sure to clean the food pusher after each use to prevent pulp buildup.
• Do not use abrasive cleaners or scouring pads, as they may scratch the surface of the food pusher.
• Keep the food pusher away from high heat sources, such as the dishwasher or stove, to avoid any potential damage.
• Inspect the food pusher regularly for any signs of wear or damage. If necessary, contact Breville customer support for replacement options.

Cleaning the Motor Base

The motor base of the Breville Juice Fountain Elite Juicer is an important component that requires regular cleaning and maintenance to ensure its optimal performance. Follow these steps to effectively clean the motor base:

• Step 1: Unplug the juicer from the power source to ensure your safety before starting the cleaning process.
• Step 2: Use a damp cloth to wipe the motor base thoroughly. This will remove any dust, dirt, or spills that may have accumulated on the surface.
• Step 3: Avoid using any abrasive cleaners or submerging the motor base in water. Abrasive cleaners can damage the finish of the base, while submerging it in water can lead to electrical hazards.
• Step 4: Once you have wiped the motor base with a damp cloth, make sure to dry it completely before plugging it back in. Moisture can cause damage to the electrical components, so ensure the base is completely dry.

Regularly cleaning the motor base of your Breville Juice Fountain Elite Juicer will not only keep it looking clean and presentable but also extend its lifespan. By following these simple steps, you can maintain the performance and durability of your juicer for years to come.

Removing Stains from the Juicer

Stains on your Breville Juice Fountain Elite Juicer can be unsightly, but with the right cleaning method, you can easily remove them and keep your juicer looking brand new. Follow these steps to effectively remove stains from your juicer:

1. Mix equal parts of water and white vinegar. Vinegar is a natural cleaning agent that can help break down stains and remove them from the surface of your juicer.

2. Dampen a cloth or sponge with the vinegar solution. Ensure that the cloth or sponge is not dripping wet, but damp enough to effectively clean the stained areas.

3. Gently scrub the stained areas of the juicer using the vinegar-dampened cloth or sponge. Apply gentle pressure and scrub in a circular motion to remove the stains. Be careful not to scrub too hard, as it may damage the juicer's surface.

4. Rinse the juicer with clean water to remove any vinegar residue. This step ensures that no vinegar is left on the juicer, which could potentially affect the taste of your freshly made juices.

5. Dry the juicer thoroughly before using it again. Use a clean, dry cloth to wipe away any excess moisture on the juicer's surface. Proper drying helps prevent the formation of new stains and keeps your juicer in top condition.

• Regularly clean your juicer to prevent the build-up of stains and residue.
• Do not use abrasive cleaners or scrub brushes on your Breville Juice Fountain Elite Juicer, as they can scratch the surface.
• If the stains persist, you can repeat the cleaning process or try using a mild dish soap and warm water solution.
• Always refer to the manufacturer's instructions for specific cleaning recommendations and guidelines.

Regular Maintenance

Keeping your Breville Juice Fountain Elite Juicer clean and well-maintained is essential to ensure its optimal performance and longevity. Regular maintenance will also contribute to the quality of the juice you extract, as a clean machine will prevent any residue or buildup from affecting the taste of your fresh juice. Here are some important steps to follow for regular maintenance:

1. Follow the cleaning instructions after each use: After juicing, it's crucial to disassemble the juicer and clean all the parts thoroughly. Wash the removable parts, such as the stainless-steel filter basket and food pusher, with warm soapy water. Use a cleaning brush to remove any stuck pulp or fiber from the mesh filter. Wipe down the base of the juicer with a damp cloth. Avoid submerging the base in water or using harsh abrasives that can damage the finish.
2. Check the power cord for any signs of damage or wear: Regularly inspect the power cord for any fraying, cuts, or exposed wires. If you notice any damage, it’s important to replace the power cord before using the juicer again. Using a damaged power cord can be a safety hazard.
3. Inspect the blades and filters regularly: Over time, the blades and filters of your juicer may become dull or clogged, affecting its efficiency. Check these components regularly for any signs of wear or blockages. If you notice dullness, consider sharpening the blades, or if you notice clogging, make sure to clean the filters properly.
4. Refer to the user manual for specific maintenance guidelines: Aside from these general maintenance steps, your Breville Juice Fountain Elite Juicer’s user manual may provide additional guidelines recommended by the manufacturer. Take the time to refer to the manual and follow any specific instructions to ensure the proper care and maintenance of your juicer.

By following these steps, you will not only keep your Breville Juice Fountain Elite Juicer in optimum condition but also prolong its lifespan. Regular maintenance and cleaning will ensure that you enjoy delicious and nutritious juices for years to come.

• Regularly clean and sanitize all removable parts.
• Use a cleaning brush to remove any stuck pulp or fiber.
• Wipe down the base of the juicer with a damp cloth.
• Inspect the power cord for any signs of damage before each use.
• Sharpen blades if they become dull.
• Clear any clogged filters to maintain efficiency.

Troubleshooting Common Issues

If you own a Breville Juice Fountain Elite Juicer, it is essential to know how to troubleshoot common issues that may arise during its use. Here are some common problems you may encounter and the steps you can take to resolve them:

Juicer Doesn't Turn On

If your juicer doesn't turn on, the first thing you should check is if it is properly plugged into a functional outlet. Follow these steps:

• Make sure the power cord is securely plugged into the juicer and the wall outlet.
• Check if the wall outlet is functioning by plugging in another appliance.
• If the outlet is working, try using a different power cord to see if the issue lies with the cord itself.
• If none of these steps solve the problem, refer to the user manual or contact customer support for further assistance.

Less Juice or Overly Wet Pulp

If your juicer is producing less juice than usual or the pulp is overly wet, the filter basket may be the culprit. Follow these steps to ensure it is clean and not clogged:

• Turn off and unplug the juicer before attempting any maintenance.
• Remove the filter basket from the juicer by twisting it counterclockwise.
• Rinse the filter basket under running water to remove any stuck fruit or vegetable particles.
• If necessary, use a soft brush to gently scrub the filter basket to remove any stubborn debris.
• Reassemble the filter basket back into the juicer by twisting it clockwise.

If the issue persists, consider trying different fruits and vegetables to ensure they are suitable for juicing, as some produce may yield less juice than others.

Unusual Noises

If your juicer is making unusual noises during operation, it is important to inspect the parts for any loose or improperly assembled components. Follow these steps:

• Turn off and unplug the juicer before checking for loose parts.
• Inspect the juicer's parts, including the filter basket, feed chute, and pulp container, to ensure they are securely in place.
• Tighten any loose parts or reassemble them if necessary.
• Make sure there are no foreign objects stuck within the juicer that may be causing the noise.

If the problem persists or worsens, refer to the user manual or contact customer support for further guidance.

If you continue to experience issues with your Breville Juice Fountain Elite Juicer that cannot be resolved through these troubleshooting steps, it is recommended to consult the user manual or reach out to Breville's customer support for further assistance.